培训啦网消息：刚刚，角焊缝用英语怎么写消息，引起了考生们的关注，也成为家长讨论的热点话题，这究竟是怎么回事呢？今天小编就给大家讲解一下！

英文写法翻译

Fillet weld

重点词汇

角焊缝───Fillet weld

双语使用场景

Value of torsion for less than the size of fillet weldheight of small-opening fillet weldis the same as that of corresponding closed fillet weld.───具有不大于焊脚尺寸的小开口焊缝，其所能承受的扭矩与相应闭合角焊缝所能承受的扭矩是几乎相同的。

Seal welds shall be welded with half the thickness of the carrying fillet weld.───密封焊道应焊成现填角焊缝厚度的一半。

weld can be divided into four types: butt weld, fillet weld, plug weld and end weld.───焊缝可分为对接焊缝、角焊缝、塞焊缝和端接焊缝四种。

Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.───在焦炭塔裙座上开设柔性槽能够减轻裙座刚度影响，降低裙座角焊缝处热应力。

EXAMINATION RECORD FOR INTERGRANULAR CORROSION, HARDNESS, metaLLOGRApHY, FILLET WELD AND WELD CHEMICAL COMpOSITIONS. . . . . .───晶间腐蚀，硬度，金相，角焊缝，焊缝化学成份检验记录表

the method of detecting T-type fillet weldlack of penetration height was discussed using ramp probe in the wing.───探讨了用斜探头在翼板上检测T型角焊缝未焊透高度的方法。

英语使用场景

The product contains compound antioxygen and proper rare earth, which have obvious effect on increasing weather fastness of non-conventional pVC and the strength of fillet weld.

Radiographic examination was performed with portable X-ray fault detector appling the special radiographic technique for fillet weldof heat exchange tube-tubeplate.

Grooving in the skirt of coke drum is able to lighten the stiffness impact on the skirt and reduce the thermal stress on its fillet weld.

Butt welds qualify full and partial penetration butt welds and fillet welds. Fillet weld tests shall be required where this is the predominant form of production welding.